Do you have hard water stains in your toilet bowl that just looks ugly? To top it off, just because it is the place where defecating is done makes the thought of seeing it dirty even worst than anything else. Those ugly rings and or streaks that seem impossible to eliminate no matter how much you try. Well here is the good news we will show how to totally vanquish that mark and we have more than one solution…

 

First solution

All you need are: Baking soda, Hot water, Vinegar and that nice toilet brush

Just put 1/2 gallon of water and 1/2 gallon of white vinegar to a boil. Flush away excess water from the bowl so the mixture that you are going to apply is not diluted too much by the cold water in the bowl. Pour half of the mixture in the bowl and add one cup of baking soda. The mixture will fizz. Ensure that the mixture reaches up to a level where the stains can be covered in it. Let it stay there for about 20 minutes. Return with your toilet brush and scrub it. The hard water stain should be softened and break up at this time. If all of the hard water stains are not gone in one go. Reheat the remainder of the mixture and repeat the process.

If the hard water stain persists then heat half a gallon of vinegar – no water this time. Pour it into the bowl to cover the hard water stains. Add one cup of baking soda and leave it for 20 minutes. Scrub away and the hard water stain should be all gone.

Second solution

This other method is a total genius hack that will surprise you if you have the one necessary ingredient WD-40. Just spray it on the hard water stain and wait three minutes and it should be softened enough to be scrubbed away.

Write A Comment